JIANGSU SUNCHI NEW ENERGY CO.,LTD.

3 Ton Heat Pump

A complete SUNCHI 3 ton heat pump water heater consists of 2 main parts:
Manufacture of the cold air part and the heating part, but in fact these two small parts are closely related and inseparable. They must work at the same time, that is, while heating, cooling the kitchen, or cooling the kitchen. Heating hot water at the same time, Its internal structure is mainly composed of four core components: compressor, condenser, expansion valve and evaporator.

The working process is as follows: the compressor compresses the recirculated low-pressure refrigerant and turns it into a high-temperature gas. The high-temperature and high-pressure refrigerant gas flows through the copper tube wound around the water tank, and the heat is conducted to the water tank through the copper tube, and is cooled down. The refrigerant becomes liquid under the continuous action of the pressure, and enters the evaporator after the expansion valve. Since the pressure of the evaporator suddenly decreases, the liquid refrigerant rapidly evaporates into a gaseous state and absorbs a large amount of heat, and at the same time, in the fan Under the action, a large amount of air flows through the outer surface of the evaporator. The energy in the air is absorbed by the evaporator, the temperature of the air is rapidly reduced, and the cold air enters the kitchen, and then the refrigerant that absorbs a certain amount of heat flows back to the compressor and enters the next cycle.
Related Products
  • EVI Heat Pump (12KW/19KW) EVI Heat Pump (12KW/19KW) EVI Heat Pump uses a high-efficiency heat exchanger, inside directly building high pressure, low-pressure sensor to easily read and balance inside safe pressure.
  • TEL:+86-0511-86639068
  • FAX:+86-511-86638191
  • EMAIL: info@suntchenergy.com
  • ADDRESS:Zhangnian Industry Park, Huangtang , Danyang city , Jiangsu province, China